PET 瓶胚專用干燥機為瓶胚量產量身定制，PET除濕干燥機，PET結晶干燥機六、設備核心優勢與瓶胚注塑適配性

1. 專屬干燥品質，保障瓶胚無缺陷：將切片含水率穩定降至≤20ppm，結晶度精準控制在 25%~35%，徹底避免 PET 水解降解，瓶胚無氣泡、發白、霧斑等缺陷，吹瓶良率提升至 99.5% 以上。
   Exclusive drying quality, ensuring defect-free preforms: Stably reduce the chip moisture content to ≤20ppm, accurately control the crystallinity at 25%~35%, completely avoid PET hydrolysis and degradation, the preforms are free of bubbles, whitening and foggy spots, and the bottle blowing yield is increased to more than 99.5%.
2. 全程密閉防吸濕，無二次污染：從原料上料到送料至注塑機，切片全程在密閉環境中運行，鎖氣閥、保溫料斗、密閉輸送機徹底隔絕環境濕空氣，同時雙級過濾保證熱風潔凈，切片無粉塵污染，滿足食品醫藥級要求。
   Full-process airtight moisture proof, no secondary pollution: From raw material feeding to feeding to the injection moulding machine, the chips run in a closed environment throughout the process. Air lock valves, thermal insulation hoppers and airtight conveyors completely isolate ambient humid air. At the same time, double-stage filtration ensures clean hot air and no dust pollution of chips, meeting food and pharmaceutical grade requirements.
3. 與注塑機深度聯動，匹配高速節拍：支持與瓶胚注塑機、模具除露機整線聯動，根據注塑開模 / 合模信號、產能需求自動調節供料速度，完全匹配 3~5s 的單模周期，保障生產線 24h 連續運行，產能提升 15%~25%。
   In-depth interconnection with injection moulding machine, matching high-speed cycle: Supports whole-line interconnection with preform injection moulding machine and mould dehumidifier, automatically adjusts the feeding speed according to the injection mould opening/closing signal and capacity demand, fully matches the 3~5s single mould cycle, ensures 24h continuous operation of the production line, and increases capacity by 15%~25%.
4. 集成化設計，適配車間狹小空間：三機一體集成式占地僅 1~3㎡，相比分體式節省 60% 以上空間，支持壁掛 / 支架式安裝，適配瓶胚生產線注塑機密集排列的車間布局，安裝便捷、管線少。
   Integrated design, adapted to narrow workshop space: The three-in-one integrated type covers an area of only 1~3㎡, saving more than 60% of space compared with the split type, supporting wall/bracket installation, adapted to the workshop layout with dense arrangement of injection moulding machines in the preform production line, with convenient installation and few pipelines.
5. 多重節能設計，降低生產成本：采用變頻風機、余熱回收、閉環熱風循環、注塑聯動供料等節能設計，能耗相比常規干燥機降低 30%~50%；分子篩吸附劑使用壽命 1~2 年，易損件更換周期長，日常維護成本低。
   Multiple energy-saving designs, reducing production costs: Adopt energy-saving designs such as frequency conversion fan, waste heat recovery, closed-loop hot air cycle and injection linked feeding, reducing energy consumption by 30%~50% compared with conventional dryers; the service life of molecular sieve adsorbent is 1~2 years, the replacement cycle of wearing parts is long, and the daily maintenance cost is low.
6. 智能精準控溫，操作維護便捷：工業級 PLC + 觸摸屏實現參數可視化、配方化管理，操作人員無需專業技術，一鍵切換不同腔數模具參數；設備自帶故障診斷、聲光報警功能，日常維護僅需定期清理過濾器、校準傳感器。
   Intelligent and precise temperature control, convenient operation and maintenance: Industrial PLC + touch screen realize parameter visualization and formula management, no professional technology is required for operators, and one key to switch mould parameters with different cavity numbers; the equipment has its own fault diagnosis and sound and light alarm functions, and daily maintenance only needs to clean the filter and calibrate the sensor regularly.